bd63715aefv-尊龙凯时ag客户端
高性能、高可靠性36v耐压 步进电机驱动器主要规格
特性：
power supply voltage (max.) [v]
28
power supply voltage (min.) [v]
19
vcc (max.)[v]
36
iout (max.)[a]
1.5
iout peak (max.)[a]
2
output on resistance (typ.)[ω]
0.95
step
to 1 / 4
mix decay function
yes
single power supply input
yes
automotive class
no
interface
clk-in
operating temperature (min.)[°c]
-25
operating temperature (max.)[°c]
85
package size [mm]
9.7x6.4 (t=1)
特点：
· rated output current（dc）1.5a· low on resistance dmos output
· clk-in drive mode
· pwm constant current (other oscillation)
· built-in spike noise cancel function
(external noise filter is unnecessary)
· full-, half (two kinds)-, quarter-step functionality
· freely timing excitation mode switch
· current decay mode switch
（linearly variable fast/slow decay ratio）
· normal rotation & reverse rotation
switching function
· power save function
· built-in logic input pull-down resistor
· power-on reset function
· thermal shutdown circuit (tsd)
· over-current protection circuit（ocp）
· under voltage lock out circuit (uvlo)
· over voltage lock out circuit (ovlo)
· ghost supply prevention (protects against
malfunction when power supply is disconnected)
· adjacent pins short protection
· microminiature, ultra-thin and high heat-radiation
(exposed metal type) package
evaluation
board
-
- evaluation board
- bd63715aefv-evk-001
this evaluation board is a board for driving the stepping motor with a rohm's stepping motor driver bd63715aefv. motor drive and driver the motor can be driven by vcc for power supply and 5v power supply for control signal. drive / stop and excitation modes can be set with an external switch. the input interface adopts the clk-in drive system, and the excitation mode supports full step, half step, quater step, 1/8 step, and 1/16 step mode by the built-in dac.
